# changelog

author: Robert-André Mauchin <zebob.m@gmail.com> - 1.0.0-5.20180925gitd0076f5
changelog:
  - Update to commit d0076f507a6027455540e2e4f25f84ca38803e07
  - Set CONFIG_LOWBITDEPTH to 1
  - Fix #1632658


author: Robert-André Mauchin <zebob.m@gmail.com> - 3.1.1-1
changelog:
  - Update to 3.1.1
  - Close: rhbz#1954337
  - Security fix for CVE-2021-30473
  - Fix: rhbz#1961375
  - Fix: rhbz#1961376
  - Security fix for CVE-2021-30475
  - Fix: rhbz#1968017
  - Fix: rhbz#1968018


author: Eric Smith <brouhaha@fedoraproject.org> 1.42-0.36.bld131
changelog:
  - Update to latest upstream snapshot.
  - Update s390x sysdefs.h patch.
  - Do not build German documentation on EL7 due to lack of tex(german.sty).


author: Pavel Lisý <pali@fedoraproject.org> - 1.2.103-1
changelog:
  - latest 1.2.x upstream release
  - Resolves bz 961057 - RFE: Cherokee 1.2.103 is available
  - Resolves bz 961056 - RFE: Cherokee 1.2.103 is available
  - Resolves bz 954199 - cherokee 1.2.103 is available
  - Resolves bz 958337 - Update request for Cherokee
  - Resolves bz 858542 - Cherokee should not be built with trace/backtrace support for performance


author: Pavel Lisý <pali@fedoraproject.org> - 1.2.103-6
changelog:
  - Resolves bz 1114461 - CVE-2014-4668 cherokee: authentication bypass when LDAP server allows unauthenticated binds
  - Resolves bz 1094901 - cherokee: script and/or trigger should not directly enable systemd units
  - Resolves bz  959170 - cherokee-worker and cherokee-admin want to use execstack (EL5)


author: Orion Poplawski <orion@nwra.com> - 0.102.4-1
changelog:
  - Update to 0.102.4 (bz#1857867,1858262,1858263,1858265,1858266)
  - Security fixes CVE-2020-3327 CVE-2020-3350 CVE-2020-3481


author: Sérgio Basto <sergio@serjux.com> - 0.103.1-3
changelog:
  - clamav-freshclam.service: Standard output type syslog is obsolete (#1933977)
  - Quiet proxy on stdout (#1814698)


author: Sérgio Basto <sergio@serjux.com> - 0.103.2-2
changelog:
  - Fix for rhbz #1969240, epel7 only, location of old freshclam update file is
    /etc/cron.d/clamav-update, not /etc/cron.d/clamav-freshclam


author: Ranjan Maitra <aarem@fedoraproject.org>
changelog:
  - 3.0.5-2
  - patched for dillo to use openssl 1.1 using patch provided  by Mattias Ellert <mattias.ellert AT physics DOT uu DOT se> 
  - fixes BZ #1470354


author: Petr Vokac <petr.vokac@cern.ch> - 1.14.2-6
changelog:
  - Bugfixes: LCGDM-2958, LCGDM-2961, LCGDM-2963, LCGDM-2964, OOB reads
  - Improvements: LCGDM-2943, LCGDM-2959, LCGDM-2962, LCGDM-2967, davs speed


author: Jakub Ružička <jakub.ruzicka@nic.cz> - 3.0.4-1
changelog:
  - Update to 3.0.4
  - Move dnstap module to subpackage
  - Move geoip module to subpackage
  - Remove redundant VERSION macro


author: Michel Alexandre Salim <salimma@fedoraproject.org> - 2.8-1
changelog:
  - Update to 2.8
  - Fix the reported version, it was not bumped for 2.8
  - Use Fedora-specific linker flags (thanks to Robert Scheck <robert@fedoraproject.org>)
  - Add basic loadability checks (Robert)
  - Pull in lua-rpm-macros explicitly on EL7


author: Jean-Francois Saucier <jsaucier@gmail.com> - 3.1.2-1
changelog:
  - Update to the new upstream version
  - Added support for postgresql 9.5
  - Removed support for postgresql 8.2


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.6.2-2
changelog:
  - Remove installed in Makefile documentation to work correctly on epel7 where doc dir still versioned.


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-0.alpha.1
changelog:
  - New upstream version - 0.8.2-alpha1.
  - New segfault issue: https://github.com/pgmodeler/pgmodeler/issues/777


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-0.2.beta
changelog:
  - Create plugins directory to do not complain on start: https://github.com/pgmodeler/pgmodeler/issues/783


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-1
changelog:
  - Update version to release 0.8.2.
  - Fix prerev var usage.
  - Add BR qt5-qtsvg-devel.
  - Use _qt5_qmake_flags macros to honor Fedora build flags, drop old hacks.
  - Step to use find_lang macro for localizations.


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-2
changelog:
  - Review request in progress - bz#977116. Thanks to Igor Gnatenko. Changes by comments https://github.com/Hubbitus/Fedora-packaging/commit/d0716a3d152c8d085988944bce7140b8e56f2e64#commitcomment-18686601
  - Use macroses %qmake_qt5 and %make_build.


author: Pavel Alexeev <Pahan@Hubbitus.info> - 0.8.2-4
changelog:
  - Add Requires shared-mime-info
  - Explicit require single logo file.
  - Drop listing %{_libdir}/%{name}/lib*.so twice.
  - Drop provate requires anf provides from '%{_libdir}/%{name}/lib*.so*'


author: Dominik Mierzejewski <rpm@greysector.net> - 2.4.3-1
changelog:
  - update to 2.4.3
  - use https in URLs
  - supply native systemd unit
  - drop obsolete patches
  - merge Fedora-specific changes into one patch
  - use system whois client instead of bundled one
  - update (and sort) Requires list
  - tighten file list
  - remove bundled stuff in prep


author: Dominik Mierzejewski <rpm@greysector.net> - 2.4.3-2
changelog:
  - fix SELinux policy temporarily (#1040425)
  - document patch purpose and file/dir permissions
  - depend on whois binary, not package
  - verify tarball GPG signature in prep


author: Dominik Mierzejewski <rpm@greysector.net> - 2.4.3-3
changelog:
  - EPEL7 install doesn't support -D and -t together
  - EPEL7 SELinux policy update (#1389191)
  - add missing dependencies
  - add dependencies to the systemd unit


author: Pavel Raiskup <praiskup@redhat.com> - 3.0.4-1
changelog:
  - new upstream release, per release notes:
    https://github.com/okbob/pspg/releases/tag/3.0.4
    https://github.com/okbob/pspg/releases/tag/3.0.3
    https://github.com/okbob/pspg/releases/tag/3.0.2
    https://github.com/okbob/pspg/releases/tag/3.0.1
    https://github.com/okbob/pspg/releases/tag/2.7.2
    https://github.com/okbob/pspg/releases/tag/2.7.1
    https://github.com/okbob/pspg/releases/tag/2.7.0
    https://github.com/okbob/pspg/releases/tag/2.6.6


author: Pavel Raiskup <praiskup@redhat.com> - 3.1.3-1
changelog:
  - new upstream release, per release notes:
    https://github.com/okbob/pspg/releases/tag/3.1.3
    https://github.com/okbob/pspg/releases/tag/3.1.2
    https://github.com/okbob/pspg/releases/tag/3.1.1
    https://github.com/okbob/pspg/releases/tag/3.0.7
    https://github.com/okbob/pspg/releases/tag/3.0.6


author: Iryna Shcherbina <ishcherb@redhat.com> - 1:3.5.0.3-3
changelog:
  - Update Python 2 dependency declarations to new packaging standards
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Jackson Isaac <jacksonisaac2008@gmail.com> - 1.0-2
changelog:
  - Add compiler flags in build. Create py2 and py3 specific packages.
  - Add kernprof script in buildroot for both py2 and py3 versions.


author: Jackson Isaac <jacksonisaac2008@gmail.com> - 1.0-5
changelog:
  - Remove python2_sitelib definition. Remove ghost from files. 
  - Add PYTHONPATH for tests. Run tests for files in tests/


author: Benjamin A. Beasley <code@musicinmybrain.net> - 0.16.1-1
changelog:
  - Initial package for EPEL7
  - Spec file substantially rewritten from the Fedora package, and reverted to an
    older version for Python 2 support, so the EPEL7 branch gets a fresh
    changelog.


author: David Benoit <dbenoit@redhat.com> 6.12-7
changelog:
  - Remove hardened build since it is enabled by default
  - Add gcc to BuildRequires
  - Remove wildcards from directory listings in files section


author: David Benoit <dbenoit@redhat.com> 6.12-8
changelog:
  - Annotate dependencies with links to source code
  - Move dependencies to racket-pkgs, since they are only used
    by that subpackage
  - Update mred symbolic links
  - Fix ownership of directories
  - Remove executable bit from starter-sh


author: David Benoit <dbenoit@redhat.com> 7.0-1
changelog:
  - Update sources to Racket v7.0
  - Remove 6.12 patches and add update remove nonfree
    srfi patch to 7.0


author: David Benoit <dbenoit@redhat.com> 7.0-2
changelog:
  - Disable SSE math on i686 until issue is fixed upstream
  - Exclude ppc due to issue building Racket v7.0 and 
    arch being deprecated in next release


author: David Benoit <dbenoit@redhat.com> 7.0-4
changelog:
  - Add scriptlets to handle updating links.rktd based on
    whether racket-pkgs is installed
  - fix owenership of docs dir
  - update docs patch


author: Michal Ambroz <rebus at, seznam.cz> 5.2.1-2
changelog:
  - patch for older version of meson used on EPEL8
  - use pkgconfig where possible for BR
  - use ldconfig_scriptlets only on older platforms
  - add ExcludeArch for s390x on EPEL8


author: Michal Ambroz <rebus at, seznam.cz> 5.3.0-1
changelog:
  - re-enable build for s390x on EPEL8 (libuv should be available for 8.4)
  - bump to 5.3.0
  - remove radare2-5.2.1-meson_rhel8.patch - accepted upstream
  - remove radare2-5.2.1-xxhash.patch - accepted upstream


author: Ken Dreyer <ktdreyer@ktdreyer.com> - 3.15-1
changelog:
  - Update to 3.15
  - Use HTTPS URLs
  - Remove Group tag
  - Enable parallel make with smpflags
  - Switch to %autosetup
  - cherry-pick "Fix passing CFLAGS to PHP configure" from upstream
  - set REMCTL_PYTHON_VERSIONS=python2 (rhbz#1606109)


author: Mattias Ellert <mattias.ellert@physics.uu.se> - 6.22.08-4
changelog:
  - Adapt to new Python RPM generators (empty .egg-info no longer works)
  - Filter out parts of tests that require remote network access instead of
    excluding the whole test
  - Fix multicore tests when running on machines with few cores


author: David Cantrell <dcantrell@redhat.com> - 1.1-1
changelog:
  - Formatting fixes in Makefile help output
  - Begin config file restructuring starting with rpminspect-data-generic
  - Support multiple configuration files.
  - Docs work in progress.
  - Only fail the annocheck inspection for RESULT_VERIFY.
  - Read debuginfo if available when running the 'annocheck' inspection.
  - Add the '%files' inspection to librpminspect
  - Add __attribute__((__sentinel__)) to the run_cmd() prototype
  - Add test suite cases for the '%files' inspection.
  - Added the 'types' inspection to compare MIME types between builds.
  - Update TODO file
  - Update the MISSING file
  - s/rpminspect.yaml/generic.yaml/ in the Makefile and README
  - Skip debuginfo and debugsource packages in the 'types' inspection
  - Add test_types.py to the test suite
  - Note the 'types' inspection generic.yaml
  - Modify add_entry() in init.c to skip duplicate entries
  - Start GitHub Action workflow files for rpminspect.
  - Install meson in ci-ubuntu.yml
  - Change 'nls' option in meson_options.txt to a boolean
  - Install gettext for ci-ubuntu
  - Add more build dependencies to ci-ubuntu.yml
  - Drop the 'method' parameter from dependency() lines in meson.build
  - Split xmlrpc libs to separate dependency() lines in meson.build
  - More xmlrpc updates for meson.build and lib/meson.build
  - Try to support systems with xmlrpc-c without the pkgconfig file.
  - Changes to build on Ubuntu, specifically the GitHub Actions system
  - Syntax error in ci-ubuntu.yml
  - Add ci-fedora.yml for GitHub Action CI on Fedora
  - Fix errors in ci-fedora.yml
  - Put all of the ci-ubuntu.yml steps in ci-ubuntu.yml
  - Remove install-libmandoc.sh and ubuntu-pkgs.sh helper scripts.
  - Install python3-setuptools in ci-ubuntu.yml
  - Install rpm-build in ci-fedora.yml
  - Install libxmlrpc-core-c3-dev in ci-ubuntu.yml
  - Disable ci-ubuntu.yml for now, enable code coverage in ci-fedora.yml
  - Remove Travis-CI files.
  - coverage fixes for ci-fedora.yml
  - Install git in ci-fedora.yml
  - Enable manual dispatching of the CI on Fedora tests
  - Remove actionspanel thing for GitHub Actions, drop Coveralls block
  - Comment the ci-fedora-yaml file
  - Fix the 'elf' inspection and test_elf.py on Ubuntu
  - Enable the ci-ubuntu GitHub Action again
  - Check all return values of getcwd()
  - Ignore installed Python modules with pip3 in ci-ubuntu.yml
  - Build 'execstack' test program with -Wl,-z,lazy
  - Add ci-centos8.yml to enable CI on CentOS 8 as a GitHub Action
  - s/centos8:latest/centos8/g
  - Trying 'container: centos:centos8'
  - Drop 'sudo' from ci-centos8.yml
  - Rename README to README.md
  - Enable GitHub Action for CI on CentOS 7
  - Drop -I from the pip install line in ci-centos7.yml
  - Use the 'make instreqs' target for install test suite deps.
  - Add back 'dnf -y install 'dnf-command(builddep)'' to ci-fedora.yml
  - Nope, that doesn't do it.  Just install make in ci-fedora.yml first
  - More 'make instreqs' fixes.
  - s/scripts/utils/g in the Makefile
  - s/TOPDIR/topdir/g in the Makefile
  - Install make in ci-centos7.yml
  - Move REQS and PIP lists out of the Makefile to files in osdep/
  - '^$$' -> '^$'
  - Slightly different sourcing of the osdep/ files
  - Set OS using := in the Makefile
  - Make the reqs.txt files in osdep/ contain all deps
  - linux-headers -> linux-headers-$(uname -r) for Ubuntu
  - Remove html401-dtds from osdep/centos8/reqs.txt
  - Use `` instead of $() since this list goes through make(1)
  - Does $(shell uname -r) work in this case?
  - More osdep/ work and simplification.
  - Rename 'osdep' to 'osdeps'
  - meson patches for opensuse
  - Move mandoc installation to post.sh in osdep/ubuntu
  - Add GitHub Action for CI on OpenSUSE
  - opensuse:latest -> opensuse/leap:latest
  - Install tar in ci-opensuse.yml
  - Install gzip in ci-opensuse.yml
  - More fixes for ci-opensuse.yml
  - Small fixes to determine-os.sh
  - ci: Add Python linting jobs
  - ShellCheck fixes for the regress/ scripts
  - ci: Add ShellCheck to lint shell scripts
  - Adjust how the Makefile reports unknown operating system.
  - Just check $ID in determine-os.sh for opensuse
  - Use pip for PIP_CMD on opensuse-leap
  - Update the centos images before doing anything else.
  - Install curl in opensuse-leap
  - Get 'rc' from Fedora on opensuse and copy it to /usr/local
  - Install kernel-default-devel for opensuse CI
  - Move the 'uses' part of the centos CI jobs to the first step
  - ShellCheck fixes for the utils/ scripts.
  - Some flake8 fixes in test/, using yapf
  - Combine all of the GitHub Actions CI runs in to ci.yml
  - Manually install rpmfluff on CentOS 7; pip is failing here
  - Use rpmfluff-0.5.7 explicitly for centos7
  - Use rpmfluff-0.5.6 on centos7
  - OK, let's try rpmfluff-0.5 for centos7
  - Last try, rpmfluff-0.5.4.1 for centos7
  - Back to trying to manually install rpmfluff for centos7
  - Style the Python code with Black
  - Add the Black formatting commit to blame revision ignore list
  - OK, just copy rpmfluff.py in place
  - Make sure to manually install rpmfluff-0.5.7.1 for centos7
  - Don't assume we have a header or even a list of files (#161)
  - python: flake8: drop * imports
  - python: flake8: wrap long lines to less than 100 characters
  - python: flake8: drop unused imports
  - python: flake8: remove unused local variables
  - python: flake8: add PEP8 whitespace
  - python: flake8: mark in-line bash scripts as raw strings
  - python: rename several duplicate test cases
  - ci: merge style workflows
  - Adjust rpminspect.spec.in for file moves and default changes.
  - Return the reallybadword to the metadata tests
  - Adjust test_metadata.LosingVendorCompareKojiBuild to expect VERIFY
  - The shared libmandoc check should not look for a static libmandoc
  - Update the AUTHORS file
  - Rename ipv6_blacklist to forbidden_ipv6_functions
  - Rename stat-whitelist to fileinfo
  - Rename 'caps_whitelist' to 'caps' and drop the use of 'whitelist'
  - Rename abi-checking-whitelist/ to abi/ in /usr/share/rpminspect
  - Rename 'version-whitelist/' to 'rebaseable/' in /usr/share/rpminspect
  - Rename "political-whitelist/" to "politics/" in /usr/share/rpminspect
  - Drop unnecessary method re-definitions in base test classes
  - Use super() rather than explicitly calling the parent class
  - Call configFile() on object instance rather than using the parent
    class
  - Upload coverage report to codecov
  - Improve the error reporting for test result checking
  - Convert to AUTHORS.md file, add Makefile target to generate it.
  - Introduce the 'movedfiles' inspection and a lot of other fixes (#155)
  - AUTHORS -> AUTHORS.md in rpminspect.spec.in
  - Add basic tests for the filesize inspection
  - Multiply the file size difference before dividing
  - Update README.md
  - Update README.md (more Markdown changes)
  - Update POTFILES and rpminspect.pot
  - chmod 0755 test_filesize.py
  - tests: optionally check the result message
  - tests: add further filesize tests for shrinking files
  - inspect_filesize: drop extra - from the message about file shrinkage
  - Enable 'permissions' inspect for single build analysis.
  - Add 24 new test cases to cover the 'permissions' inspection.
  - chmod 0755 test_permissions.py
  - Make sure all RESULT_INFO results are set to NOT_WAIVABLE
  - Fix some specific problems with the 'permissions' inspection.
  - Pass "-r GENERIC" to rpminspect in the TestCompareKoji class
  - Add 12 more permissions test cases for setuid file checks
  - Update TODO list
  - Update test_symlink.py tests for new waiver_auth values
  - Add a fedora-rawhide job and renamed 'fedora' to fedora-stable
  - Update the rpminspect.pot translation template
  - Relicense librpminspect (lib/ and include/) as LGPL-3.0-or-later
  - Ignore .tox/ subdirectory
  - License the rpminspect-data-generic subpackage as CC-BY-4.0
  - Add a copy of the Apache 2.0 license for the 5 files in librpminspect
  - Update the License tag in the spec file and the %license lines
  - Add debian-testing as a CI workflow; add missing osdeps files.
  - Update determine-os.sh to handle Fedora stable and rawhide
  - Drop the use of 'sudo' in ci.yml
  - sudo required for Ubuntu CI job, install make for debian-testing
  - See what $ID is set to in determine-os.sh
  - Workaround a bug in meson 0.55.0 for Fedora CI jobs
  - Add 'debian' catch to utils/determine-os.sh
  - Rename 'osdeps/debian-testing/' to 'osdeps/debian/'
  - Add opensuse-tumbleweed to the CI job list
  - Add libmagic-dev to osdeps/debian/reqs.txt
  - Fix memory corruption in init_rpminspect
  - Add comment clarifying the License tag in the spec file.
  - If check_results() raises AssertionError, dump the JSON output
  - Fix test_changelog.py test cases that are failing.
  - Fix UnbalancedChangeLogEditCompareKoji
  - Handle rpm versions with x.y.z.w version numbers in test_symlinks.py
  - Fix mandoc build problems in opensuse-tumbleweed CI job
  - Install gcovr using pip on opensuse-tumbleweed
  - Handle systems that lack pkg-config files for libelf and libcap
  - Add archlinux CI job in GitHub Actions
  - Forgot --noconfirm on the 'pacman -Syu' line.
  - Add missing DESC_MOVEDFILES block to inspection_desc()
  - More minor fixes to the Arch Linux CI job.
  - Install gcovr with pip for the Arch Linux CI job.
  - Support building on systems that lack <sys/queue.h>
  - Add detection for <sys/queue.h> to meson.build
  - Ensure an int is used for snprintf() in inspect_manpage_path()
  - WIP: 'abidiff' inspection
  - Only report permissions change if there is a mode_diff (#181)
  - Fix -Werror failures in inspect_abidiff.c
  - Add sl_run_cmd() to librpminspect.
  - Add get_arches() to librpminspect
  - WIP: abidiff inspection
  - Some minor edits to the README.md file
  - More minor updates to the README.md file
  - Replace get_arches() with init_arches()
  - Add test_addedfiles.py to the integration test suite
  - Expand find_one_peer() to soft match versioned ELF shared libraries
  - Add the beginnings of the 'abidiff' inspection code.
  - Report out findings in the abidiff inspection.
  - Update the test suite to cover rpmfluff 0.6
  - libmandoc configure workaround needed on Debian too
  - shellcheck fixes for the scripts in utils/
  - Add abi.c, the code that reads in the ABI compat level files (#144)
  - Be sure to close the open file before exiting init_fileinfo()
  - Python formatting cleanups
  - Add --diff to the Python format checker
  - Add new setting to abidiff section of the config file
  - Add -n/--no-rebase command line option to disable rebase detection
  - Store size_threshold as a long int rather than a char *
  - Check abidiff(1) results against the ABI compat level definitions
    (#144)
  - Add 'apt-get -y install libgcc-s1:i386' to pre.sh for Debian
  - Add integration test cases for the abidiff inspection (#144)
  - Add 'dpkg --configure -a' to pre.sh for debian
  - Install libterm-readline-perl-perl for debian CI
  - Install libabigail for Fedora and CentOS CI jobs
  - libgcc-s1:i386 -> lib32gcc-s1 for debian CI
  - Install libabigail for opensuse-leap, opensuse-tumbleweed, and arch CI
  - Install libabigail for debian and ubuntu CI
  - Install libabigail-dev for debian and ubuntu, not libabigail
  - Install libabigail-tools on opensuse-leap and opensuse-tumbleweed
  - Install libabigail-git for arch linux CI
  - Move free_argv_table() to runcmd.c
  - Install 'abigail-tools' for debian-testing and ubuntu CI
  - Install libabigail using the Arch User Repo on arch CI
  - Explain the osdeps/ subdirectory.
  - No, just clone libabigail from git and build it manually on arch
  - Add beginning of kmidiff inspection, put ABI functions in abi.c
  - Read list of possible kernel executable filenames from the config
    file.
  - Drop abidiff_ and kmidiff_ from extra_args; add kernel_filenames
  - Just call the abidiff and kmidiff extra args settings "extra_args"
  - Define 'kmi_ignore_pattern' in the config file.
  - Handle builds that lack all debuginfo packages (#186)
  - Do not assume peer->after_hdr exists (#187)
  - Store copy of original pointer in strsplit() to free at the end.
  - Use mmap() and strsplit() in read_file() rather than a getline() loop
  - Fix memory leaks in abi.c functions
  - open() failure in readfile() is not fatal, just return NULL
  - Add utils/gate.sh
  - Have check_abi() pass back the ABI compat level found
  - Update descriptions for abidiff and kmidiff inspections
  - Hook up the kmidiff inspection.
  - Use read_file() in init_fileinfo() and init_caps()
  - Use read_file() in validate_desktop_contents()
  - Use read_file() in disttag_driver()
  - Adjust how init_fileinfo() and init_caps() iterate over file contents
  - Fix 'tox -e format' style problems found.
  - Avoid comparing elf files that are not shared libraries
  - Support --kmi-whitelist in the kmidiff inspection
  - Trim worksubdir from paths in reported abidiff and kmidiff commands
  - Remove the kmi_ignore_pattern setting for the config file.
  - Create include/queue.h to replace the _COMPAT_QUEUE blocks everywhere
  - Update AUTHORS.md
  - Report metadata changes for rebased packages as INFO
  - Do not fail the specname inspection when given a non-SRPM
  - For passing upstream inspections, do not report a remedy string.
  - Do not fail the lostpayload inspections if it only gives INFO messages
  - Clarify unapproved license message in the license inspection
  - Use FOPEN_MAX for nopenfd parameter in nftw() calls
  - Make sure to close open file descriptors from get_elf() calls.
  - Include 'src' architecture in the rpminspect runs in gate.sh
  - Make sure kmidiff is listed in the spec file
  - TODO updates
  - Update rpminspect.pot and POTFILES for translations


author: David Cantrell <dcantrell@redhat.com> - 1.2-1
changelog:
  - For BUILDTYPE=release, generate the correct type of changelog
  - Minor logic error in submit-koji-builds.sh
  - Fix reading existing spec file in submit-koji-builds.sh
  - Bump development build version to 1.2
  - Use is_rebase() in the 'upstream' inspection
  - Use rpmtdSetIndex() and rpmtdGetString() in get_header_value()
  - Add get_rpmtag_fileflags() to files.c and call from extract_rpm()
  - Use correct Version and Release values in download_build()
  - #include <rpm/rpmfiles.h> -> #include <rpm/rpmfi.h>
  - Add the 'config' inspection to librpminspect
  - Rephrase reporting messages in the 'config' inspection
  - Add the 'doc' inspection to librpminspect
  - Update TODO list
  - Minor updates to try and make gate.sh more reliable
  - Add config and doc to the inspections list in generic.yaml
  - Rename the '%files' inspection to 'files' (#194)
  - Modify baseclass.py to allow 'before' and 'after' NVR tuples
  - Use the after tuple to override the NVR in test_abidiff.py
  - Use the after tuple to override the NVR in test_upstream.py
  - Write rpminspect output to a file in the test suite
  - Add 28 test cases for the 'config' inspection
  - Fix the errors in the 'config' inspection found by the test suite
  - Fix Python problems in the test suite reported by black and flake8
  - Add Makefile targets for black and flake8
  - One more formatting issue reporting by Python black in test_config.py
  - More 'python black' formatting errors reported for test_config.py
  - https://mandoc.bsd.lv -> http://mandoc.bsd.lv
  - Add a -D/--dump-config option to rpminspect(1)
  - Use global reported variable in 'config' inspection
  - Fix reporting errors in the 'doc' inspection
  - Add test_doc.py with 'doc' inspection test cases
  - Ignore flake8 W291 in test_doc.py where we explicitly want whitepsace.
  - Add init_rebaseable() to librpminspect
  - Check the rebaseable list in is_rebase() in librpminspect
  - Update TODO list
  - Define a new GitHub Action using utils/gate.sh
  - Update the README.md file
  - shellcheck fixes for utils/gate.sh
  - Use utils/find-ninja.sh to determine what ninja-build command to use
  - Install fedora-packager for the gate.yml GitHub Action
  - Remove before and after variables from gate.sh; unused
  - Remove unnecessary basename() calls in inspect_upstream.c
  - Do not assume an or bn contain strings in is_rebase() (#196)
  - Adjust what things run during with GitHub Actions
  - Add get_rpm_header_string_array() to librpminspect
  - Replace init_source() with get_rpm_header_string_array() in
    inspect_upstream.c
  - free() allocated output string in inspect_changelog.c on errors
  - s/10240/16384/ in archive_read_open_filename() call in unpack.c
  - Add the 'patches' inspection to librpminspect
  - Add uncompress_file() to librpminspect
  - Add filecmp() and use that in place of zcmp/bzcmp/xzcmp
  - README.md updates
  - Restrict some GitHub Actions to source code and test suite changes.
  - Only enable lz4 compression if ARCHIVE_FILTER_LZ4 is defined
  - Go ahead and wrap the rest of the libarchive compression filters
  - s/class Test/class /g
  - Make sure uncompress_file() supports xz compression
  - Handle more compressed file MIME types.
  - Add test_changedfiles.py to the test suite.
  - Add test_patches.py with test cases for the 'patches' inspection
  - flake8 fixes in the test suite
  - Python format fixes for test_changedfiles.py
  - Python format fixes in test_patches.py
  - More Python format fixes for test_patches.py
  - Remove unnecessary 'a' in DESC_PATCHES
  - Better explanation as to why the EmptyLicenseTag tests are skipped.
  - Test suite cleanup; add rebase= and same= to TestCompareSRPM
  - Black formatting fixes for the test suite.
  - Remove unused imports in test_upstream.py
  - Revert black fixes for test_config.py
  - Fix my email address in test suite source files.
  - Support single package URLs for before and after builds (#190)
  - Handle invalid/missing RPMs in get_product_release()
  - Use warnx(), errx(), and err() in src/rpminspect.c
  - Modify submit-koji-builds.sh to pick up all pkg-git branches.
  - Update the rpminspect.1 man page to reflect current status.
  - Update translation template files in po/
  - Support relative directory paths for the -w option (#188)
  - Implement the 'virus' inspection and add test cases for it.
  - Update po/ template files
  - Python formatting fixes for test_virus.py
  - Update the osdeps/*/reqs.txt files.
  - More osdeps updates for the clamav needs
  - Install 'xz' for the 'style' GitHub Action
  - Fix a variety of small memory leaks in librpminspect
  - Stop the freshclam service for the Ubuntu gate job
  - Support slightly older versions of libclamav in inspect_virus.c
  - Add the 'politics' inspection to librpminspect.
  - In tearDown() in the test suite, call rpmfluff clean() methods
  - Add test_politics.py with 'politics' inspection test cases
  - Python black format fixes for test_politics.py
  - 'it should added' -> 'it should be added'
  - Increase the runtime timeout for test_virus.py
  - Install the timeout decorator on all OSes in our GitHub Actions
  - Install timeout-decorator with pip, not timeout
  - Expand librpminspect with support for SHA-224, SHA-384, and SHA-512
  - Define DEFAULT_MESSAGE_DIGEST in constants.h and use that.
  - Replace some fprintf()/fflush() calls with warn()/warnx() calls
  - Rename the 'DT_NEEDED' inspection to 'dsodeps'
  - Rename 'LTO' inspection to 'lto'
  - Update translation template and fix two incorrect error strings.
  - Note all valid message digests in data/politics/GENERIC
  - Improve reporting in the patches inspection
  - Only fail 'changedfiles' for VERIFY and higher results
  - If 'removedfiles' only reports INFO messages, pass the inspection
  - If 'addedfiles' only reports INFO results, pass the inspection
  - If 'patches' only reports INFO results, pass the inspection
  - No need to check value of allowed in permissions_driver()
  - Do not let INFO results fail the 'doc' inspection.
  - Do not let all INFO results in 'upstream' fail the inspection
  - Fix RPMFILE_FLAGS handling for %config files (#221)
  - Still report file changes in the 'config' inspection for rebases
  - Correctly check RPMFILE_DOC flags in the 'doc' inspection
  - Include rpm/rpmfi.h insted of rpm/rpmfiles.h
  - Only check regular files and symlinks in the 'doc' inspection
  - Remove unnecessary assert() statements in filecmp()
  - Remove incorrect warnx() reportings based on filecmp() return value
  - Exclude man pages from the 'doc' inspection
  - Honor the -a command line option for downloads as well as runtime
    (#233)
  - Allow optional 'commands' block in the config file
  - Fix assorted non-critical memory leaks
  - Remove unnecessary warn() after a failed stat()
  - Additional memory fixes for the abidiff inspection (#244)
  - Free ELF symbol names list in find_lto_symbols() before return
  - Followup to the memory fixes for read_abi() and free_abi()
  - Prevent invalid pointer dereferencing in invalid result in 'patches'
    (#245)
  - Avoid reusing the same abi_pkg_entry_t struct in read_abi()
  - Allow a set of excluded path prefixes in 'pathmigration'
  - Fix the YAML parsing for the pathmigration block
  - Document the BRANCHES variable for 'make koji'
  - Include the .asc file when submitting new Koji builds (#191)
  - Include the .asc file in the spec file


author: David Cantrell <dcantrell@redhat.com> - 1.3-2
changelog:
  - Small change to the way Koji builds are submitted
  - Move the master branch to version 1.3
  - Drop DEBUG_PRINT in process_table()
  - Add doc/git.md to explain source control conventions
  - Change Suggests to Recommends in the spec file
  - Add kmidiff and politics to the inspections section of generic.yaml
  - Update TODO list
  - Use warn() for non-fatal errors in mkdirp()
  - Require libabigail >= 1.8 in rpminspect.spec.in
  - Enable multiple --headers-dir1 and --headers-dir2 args in abidiff
  - Swap out some more fprintf()/fflush() reporting with warn()
  - #include <err.h> in peers.c and rmtree.c
  - On fedora-rawhide CI jobs, install gcc-c++ and gcc-plugin-devel
  - Disable fedora-rawhide GitHub Action for now
  - Correctly handle the -w option on rpminspect(1) (#256)
  - Drop the relative path handling for the -w option
  - Build and install rc from source on opensuse-leap
  - Update doc/git.md on how to track upstream
  - Add .github/ and osdeps/ directories to extra-ci.yml
  - Build and install rc from source on opensuse-tumbleweed
  - Adjust curl(1) command line used for rc in opensuse CI jobs
  - Trying to figure out why the opensuse jobs produce curl errors
  - Another slight change to post.sh for the opensuse-leap CI job
  - s/PowerTools/powertools/g in the centos8 PKG_CMD definition
  - The output of html2text on opensuse systems is different
  - Rename HEADER_MAN to HEADER_MANPAGE (#264)
  - Add inspection_header_to_desc() to librpminspect (#264)
  - Add xunit output format support (#264)
  - Support the new output function call syntax (#264)
  - Move init_elf_data() to readelf.c, move data to struct rpminspect
  - Update inspect_elf.c unit tests for librpminspect changes
  - Remove check_ipv6() from inspect_elf.c
  - Create the badfuncs inspection
  - Update po/ translation files.
  - Add badfuncs test cases
  - Forgot to commit test_badfuncs.py.
  - Fix flake8 and black errors with test_badfuncs.py
  - Skip debug packages in filesize, display changes correctly
  - Fix spurious execstack failure
  - Fix YAML config file reading for BLOCK_INSPECTIONS
  - Expand dump_config() to cover all config file settings
  - Minor spelling fixes in strfuncs.c and making code explicit
  - Simplify list_to_string() so it handles 1-elements lists right
  - Add abspath() to canonicalize path strings
  - In the doc inspection, only show diff(1) output for text files (#254)
  - Add strxmlescape() to strfuncs.c in librpminspect (#264)
  - Output the system-out xunit portion as CDATA (#264)
  - Slightly change how strxmlescape() works
  - Add the runpath inspection to librpminspect
  - Rename test/data/lto.c to test/data/mathlib.c
  - Handle the empty string case in abspath()
  - Expand dump_cfg() to show runpath settings
  - Fix block handling problems in the YAML config reader
  - Note single builds cannot be rebases in is_rebase()
  - Hook up the driver for the runpath inspection
  - Install patchelf for tests on fedora and centos
  - Update TODO and README.md files
  - Pass -D to rpminspect in the test suite
  - Add integration tests for the runpath inspection
  - Python flake8 and black fixes in test_runpath.py
  - Fixes for GitHub Actions on Debian and Ubuntu
  - Disable Rust support in pip modules, more extra-ci fixes
  - Update pip and setuptools on debian and ubuntu CI jobs
  - Make sure pip is updated on debian, centos7, and centos8
  - Fixes for extra-ci on arch, centos7, centos8, and debian
  - Adjust docker image names for opensuse and arch
  - Add Gentoo Linux to the Extra CI set
  - extra-ci.yml typo fix for the gentoo job
  - Use gentoo/stage3 as the container for the gentoo CI job
  - Disable opensuse-tumbleweed and archlinux CI jobs
  - Make sure util/determine-os.sh picks up Gentoo Linux
  - In the runpath inspection, fail if DT_RPATH and DT_RUNPATH exist
  - Use pip install for PIP_CMD on gentoo
  - Set PIP_CMD to pip install -user for gentoo
  - Handle a NULL from list_to_string() in abspath()
  - Do not match path prefixes in the runpath inspection
  - Python black fixes for test_runpath.py
  - Stop doing an emerge --sync on the gentoo CI job
  - Replace emerge --sync with a manual portage sync
  - Use emerge-webrsync to update portage on gentoo
  - Add uthash and move the file matching code to it.
  - Typo fix in README.md
  - Fix some memory leaks found by valgrind
  - Create mkannounce.sh to help make release announcements easier
  - shellcheck fixes for mkannounce.sh


author: David Cantrell <dcantrell@redhat.com> - 1.4-1
changelog:
  - Start work on the 1.4 release
  - Trim git commit summary prefix from changelog lines
  - Report the program version number in the results (#309)
  - Handle compressed but otherwise empty man pages (#308)
  - Flake8 fixes for test_manpage.py
  - s/self.rpm/self.after_rpm/ in two test_manpage.py tests
  - Disable broken ELF heurisitic and size limit in libclamav
  - Modify dump_cfg() to write valid YAML to stdout (#306)
  - Migrate more code off hsearch and to uthash
  - Replace hsearch() with uthash in the kmod inspection
  - Update TEST_METADATA status in TODO and MISSING
  - Restrict style checks to specific directories
  - Replace hsearch() with uthash in the abidiff inspection
  - Change tsearch/twalk use to uthash
  - Correct misuse of entry with hentry variables (#321)
  - Normalize copyright boilerplates in source files
  - Use hentry->key over hentry->value in pathmigration
  - Adjust lib/meson.build for Fedora rawhide
  - Drop gate.yml and begin non-x86_64 arches in ci.yml
  - Add armv7, aarch64, and s390x to the other_arches job
  - Change init.c error reporting over to err/warn functions
  - Modify file triggers and matrix use in ci.yml
  - Split 32-bit osdeps out to post.sh scripts in osdeps/
  - Split style.yml in to shellcheck.yml and python.yml
  - Rewrite extra-ci.yml to use the matrix strategy method for GHA
  - Move the emulated CI jobs to extra-ci.yml
  - s/pkg/pki/ for the centos jobs
  - Debian and Ubuntu fixes for CI
  - Python pip on Debian is called pip
  - Try to fix just debian:stable
  - Enable debian:testing in extra-ci.yml
  - Enable centos8 in extra-ci.yml again
  - Enable centos7 in extra-ci.yml again
  - Enable opensuse-leap and gentoo in extra-ci.yml again
  - Run each test script individually on emulated targets
  - Try a different syntax for the emulated matrix jobs
  - Install s390 glibc headers on s390x fedora systems
  - Detect 32-bit and musl presence in test_elf.py
  - Skip lost -fPIC tests if gcc lacks -m32 support
  - Add stretch and buster to the emulated targets list
  - Drop Debian buster from the emulated targets
  - Install gcc-multilib only on Debian x86_64 and s390x systems
  - libc-dev:i386 -> libc6-dev:i386
  - Disable Debian targets in extra-ci temporarily
  - s/AUR/git/g in osdeps/arch/post.sh
  - In read_cfgfile(), keep track of block depth correctly (#329)
  - A few more yaml parsing fixes for block vs group
  - Recommend or Require libabigail >= 1.8.2
  - Finish normalizing all the error reporting statements
  - Advertise of rpminspect-report in the contrib README.
  - Report libclamav version and CVD versions (#258)
  - Ensure first argument of warn(3) is a format string.
  - Enable werror=true and warning_level=3 in default_options
  - Update the translation template file
  - Get rid of invalid free() in get_product_release()
  - Add inspection_id() to librpminspect
  - Update the po/rpminspect.pot template
  - Improve mkannounce.sh to handle stable and devel releases


author: David Cantrell <dcantrell@redhat.com> - 1.5-1
changelog:
  - Begin work on version 1.5
  - Use llabs() instead of labs() in the filesize inspection
  - Improve has invalid execstack flags reporting
  - Use long unsigned int to report size changes in patches
  - Fix some errors in the changedfiles inspection
  - Update the changedfiles test cases
  - Check DT_SONAME in is_elf_shared_library()
  - Skip debuginfo and debugsource files in abidiff
  - Make sure abidiff test cases add a DT_SONAME to the test lib
  - Report INFO level for patches findings by default
  - Python black fixes in test/test_abidiff.py
  - Update the test/test_patches.py cases for patches changes
  - Generate regular changelog in utils/srpm.h
  - Skip branches without targets in submit-koji-builds.sh
  - Fedora and CentOS systems in ci need diffstat
  - opensuse-leap CI job requires diffstat
  - Fix the Debian CI jobs in GitHub Actions
  - Fix and enable the Ubuntu extra-ci job in GitHub Actions
  - Use pip instead of pip3 for the Ubuntu command
  - Use apt-get -y install in
  - Enable the opensuse-tumbleweed GHA job again
  - Make sure the Gentoo GHA job has diffstat
  - Get the Arch Linux GHA job working again
  - Use ubuntu:latest for the ubuntu GHA image
  - Simplify the utils/determine-os.sh script
  - Update license table in README.md
  - Allow any number of builds specified for fetch only mode
  - Handle old or broken versions of libmagic in changedfiles
  - Update GitHub Action status badges in README.md
  - Fix $(OS) check in the Makefile
  - Fix the ubuntu GitHub Actions extra-ci job
  - Make sure the centos8 job has git available before cloning
  - Change strappend() to work as a variadic function
  - Use json_tokener_parse_ex() to get better error reporting
  - Fix reading of the javabytecode block in the config file
  - Catch missing/losing -fPIC correctly on .a ELF objects (#352)
  - Refactor elf_archive_tests() and its helper functions
  - Followup fix for find_no_pic, find_pic, and find_all
  - Install cpp-coveralls using pacman on Arch Linux
  - Install cpp-coveralls using pip on Arch Linux
  - Install cpp-coveralls in pre.sh on Arch Linux
  - Install required Python modules in pre.sh on Arch Linux
  - Do not upgrade pip on Arch Linux, go back to using pip.txt
  - Drop DEBUG_PRINT from source generated by pic_bits.sh
  - Do not run apt-get update as a second time on Debians systems
  - The lost PIC tests need to invoke gcc with -fno-PIC
  - Update the OpenSUSE Tumbleweed files, but disable it anyway
  - Define inspection_ignores in struct rpminspect
  - Clean up the config file section reading code
  - Add add_ignore() to init.c
  - Fix fetch only mode download directory
  - Stub out libcurl download progress callback function
  - Perform symbolic owner and group matching in ownership (#364)
  - Restrict download_progress() to systems with CURLOPT_XFERINFOFUNCTION
  - Read per-inspection ignore lists from the config file.
  - Add commented out per-inspection ignore blocks
  - Implement per-inspection path ignore support (#351)
  - Report annocheck failures correctly in librpminspect.
  - Note all regular expression settings use regex(7) syntax
  - Allow size_threshold: info in the config file (#261)
  - Check ignore list in files for path prefixes to ignore (#360)
  - Support a list of expected empty RPMs in the config file (#355)
  - Call mparse_reset() before mparse_readfd()
  - Do not crash with the -c option specifies a non-existent file
  - Update TODO list
  - Make sure brp-compress is disabled in test_manpage.py
  - Require/Recommend /usr/bin/annocheck
  - Note size_threshold can be the keyword info
  - Ensure ctxt->lastError.message is not NULL before strdup (#382)
  - Handle corrupt compressed files in changedfiles (#382)
  - Disable debugging output for the ignore lists in init.c
  - Drop debugging output in the xml inspection
  - Remove what working directories we can
  - Correctly find icons for desktop files in subpackages (#367)
  - Followup to the Icon= check in the desktop inspection (#367)
  - BuildRequires libmandoc-devel >= 1.14.5
  - Manually install mandoc on centos7 for now


author: Josh Stone <jistone@redhat.com> - 1.51.0-2
changelog:
  - Security fixes for CVE-2021-28876, CVE-2021-28878, CVE-2021-28879
  - Fix bootstrap for stage0 rust 1.51


author: Josh Stone <jistone@redhat.com> - 1.52.1-2
changelog:
  - Set rust.codegen-units-std=1 for all targets again.
  - Add rust-std-static-wasm32-unknown-unknown.
  - Rebuild f34 with LLVM 12.


author: Lokesh Mandvekar <lsm5@fedoraproject.org> - 2.5.1-1
changelog:
  - Resolves: rhbz#1095890 - upstream version bump to 2.5.1
  - Resolves: rhbz#1095967 - spectrwm packaging issues
  - generate and install appropriate licenses


author: Nikolai Kondrashov <Nikolai.Kondrashov@redhat.com> - 4-1
changelog:
  - Release v4. Added features and implemented fixes follow. See README.md and
    manpages for documentation of new features.
  - Extract user session recording functionality from tlog-rec into a new tool:
    tlog-rec-session. It should be used as the user's login shell now, and
    tlog-rec should be used as a general recording and testing tool.
  - Add (optional) support for writing to and reading from Systemd Journal - the
    "journal" reader and writer.
  - Make tlog-rec default to "file" writer, and tlog-rec-session to "journal",
    if built with Journal support, and to "syslog" otherwise.
  - Add "-o" option to tlog-rec as an alias to "--file-path".
  - Add "-i" option to tlog-play as an alias to "--file-path".
  - Assume locale charset is UTF-8, if ASCII charset is detected, since that is
    a likely indication the locale settings were lost. E.g. upon console login
    or "su -" on Fedora and RHEL.
  - Switch the "ver" JSON field type to string. Now it should be two numbers
    separated by a dot. The increase of the first number indicates
    forward-incompatible changes, the increase of the second number -
    forward-compatible. If the dot and the second number are omitted, the second
    number is considered to be zero. Bump the format version to "2".
  - Add a new JSON field: "rec", containing an opaque host-unique recording ID.
    Bump the format version to "2.1".
  - Add support for playback controls, both through the command line and via
    playback-time control keys, including: speed adjustment, pause/resume,
    fast-forward to a time, and packet-by-packet stepping through the recording.
  - Add optional rate-limiting of logged messages. Both throttling and dropping
    messages are supported.
  - Add "--lax" option to tlog-play to allow playing back recordings with
    missing messages.
  - Fix input being ignored when there is a lot of output, while recording.
  - Remove addition of tlog-rec (tlog-rec-session) to /etc/shells from RPM
    packaging to prevent users from changing their shells themselves once it has
    been assigned.
  - Add support for specifying the shell to start via the tlog-rec-session
    executable name. E.g. by making a tlog-rec-session-shell-zsh ->
    tlog-rec-session symlink and executing it. That can be used to specify
    particular shells to be recorded for specific users by assigning these
    symlinks as their login shells.
  - Make error messages from all the tools a bit less noisy and more readable.


author: Kirill Glebov <kgliebov@redhat.com> - 5-1
changelog:
  - Release v5. Added features and implemented fixes follow. See README.md and
    manpages for documentation of new features.
  - Implement support for --configuration option for all programs.
    The option makes the program output its configuration in JSON and then
    exit.
  - Add BuildDependencies to allow yum-builddep.
  - Open JSON writer file with euid/egid. To allow creating protected log files
    with tlog-rec-session, open the JSON writer's file with the EUID and
    GUID the program was started with.
  - Installing Packages with the APT Addon instead of apt-get.
  - Switch to using TLOG_ERRS_RAISE macros.
  - Fix tlog-play cleanup-path segfault.
  - Modify command-line option parsing.
  - Remove "fields" field from ES query URL to fix compatibility with
    Elasticsearch 5.
  - Remove unused _source parameter from ES query URL.
  - Fix tlog-rec-session file permissions bug.
  - Use CLOCK_MONOTONIC for rate-limiting writing.
  - Filter out some more input control sequences.


author: Justin Stephenson <jstephen@redhat.com> - 6-1
changelog:
  - Release v6. Added features and implemented fixes follow. See README.md and
    manpages for documentation of new features.
  - Add integration tests for end-to-end test coverage.
  - Fix compiler type comparison error with json-c json_object_array_length
    return value.
  - Fix a distribution issue causing incorrect M4_CONF_PATH expansion.
  - Log more detailed error when systemd journal is not present.


author: Marcel Härry <mh+fedora@scrit.ch> - 0.3.5.15-1
changelog:
  - update to latest upstream release (with security fixes!)
  - Fixes bz#1972880, bz#1972883, bz#1972887 => CVE-2021-34550 / CVE-2021-34549 / CVE-2021-34548


author: David Brown <david.brown@pnnl.gov> - 4.2.10-3
changelog:
  - Bugfix - #1215207 create/install service files for these
  - Bugfix - #1117263 qmgr aborts in some instances
  - Bugfix - #1144396 Hey! Version Bump!
  - Bugfix - #1215992 more service scripts
  - Bugfix - #1216037 fixed permissions on directories
  - Bugfix - #1149045 hopefully these are all fixed now
  - Bugfix - #965513 calling this one fixed...


author: David Brown <david.brown@pnnl.gov> - 4.2.10-4
changelog:
  - Bugfix - #1227003 test system in cluster environment
  - Bugfix - #1216049 add --enable-cpuset and hwloc
  - Bugfix - #1176080 this maybe a duplicate of #1216037


author: David Brown <david.brown@pnnl.gov> - 4.2.10-9
changelog:
  - Resolve dependencies for rawhide (#1308192)
  - Fix port and args environment variables for el5/6 (#1254301)


author: Pavel Alexeev <Pahan@Hubbitus.info> - 5.2.3-6
changelog:
  - Changes made due review process. Thank you to Manuel Wolfshant.
  - Removed AUTHORS files mention as it absent now.


author: Robert Scheck <robert@fedoraproject.org> 5.0.7-2
changelog:
  - Remove build-time path from rpath (#1891370 #c1)
  - Apply Fedora system-wide crypto policy (#1891370 #c1)
  - License breakdown in spec file (#1891370 #c1)


author: Mattias Ellert <mattias.ellert@physics.uu.se> - 0.7.4-1
changelog:
  - Update to version 0.7.4
  - Enable runtime detection of sse2/avx2/avx512 on intel architectures
  - Fix compiler warning for 32 bit architectures


author: Mattias Ellert <mattias.ellert@physics.uu.se> - 0.8.0-1
changelog:
  - Update to version 0.8.0
  - Drop patches xxhash-compiler-warning-32-bit.patch (accepted upstream)
    and xxhash-pkgconfig.patch (issue fixed upstream)
  - Fix empty version in .pc file


